Setting Up an Icom 7300 for 1300 Hz Tones

What this page covers

• External transceiver setup
• DMX-40 and MMX External Mode
• 1300 Hz signal reception
• Transmitting on the decoded station frequency

Setting Up an Icom 7300 for 1300 Hz Tones

Setting Up an Icom 7300 for 1300 Hz Tones addresses how an external transceiver can support DMX-40 or MMX External Mode. The article focuses on proper 1300 Hz reception and transmission on the decoded station frequency.

• The article addresses external transceiver setup.
• The DMX-40 or MMX can operate in External Mode.
• The setup concerns 1300 Hz signals.
• The transmitter uses the frequency of the decoded station.

Article Content

Setting Up an Icom 7300 for 1300 Hz Tones provides guidance about using an external transceiver with DMX-40 or MMX External Mode. The article focuses on matching 1300 Hz signal reception with transmission on the decoded station frequency.

• The article discusses confusion about external transceiver configuration.
• The configuration supports proper 1300 Hz signal reception.
• The transmitter remains aligned with the decoded station frequency.

Facts Index

Who Is This For

• Readers seeking guidance for setting up an external transceiver with DMX-40 or MMX External Mode.
• Radio operators working with 1300 Hz signals and decoded station frequencies.

Frequently Asked Questions

Setting Up an Icom 7300 for 1300 Hz Tones covers external-transceiver setup for DMX-40 or MMX External Mode, including 1300 Hz reception and transmission on the decoded station frequency.

Eric Anderson authored Setting Up an Icom 7300 for 1300 Hz Tones.

Setting Up an Icom 7300 for 1300 Hz Tones was published on 2023-01-21.