{"title":"MMX Collection","description":"\u003cp\u003eBelow are the price-reduced MMX family member. MMX Transceiver is marked down 60% from $549 to $329. All accessories in the bundles are marked down 20%.\u003c\/p\u003e","products":[{"product_id":"mmx-multiband-morse-code-transceiver","title":"MMX Multi-band Morse Code Transceiver","description":"\u003ch1\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003cstrong\u003eMulti-Band QRP Portable Computer Plus Transceiver!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #6f0cfd;\"\u003eCheck out the MMX Bundles below!\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNOTE: while the receiver in the MMX can tune outside of the amateur radio bands, the transmitter is restricted to the frequencies allocated by the FCC for amateur radio operation. In addition, by entering your license, the frequencies may be additionally limited based on the available frequencies allocated for your license level.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eMMX Multi-band Morse Code Transceive\u003c\/strong\u003er is the evolution of the \u003cstrong\u003eDMX-40 Morse Code Transceiver,and includes the keyboard and a small pair of wired earbuds!\u003c\/strong\u003e  It has the same industry-leading decoder, the same high sensitive SDR receiver, 10 frequency memories per band, RPL microprogramming for custom automation, and more.  However, what is added is a band board plug-in system that supports up to 3 bands.  Currently, the supported bands include 80, 40, and 20 meters.  You can purchase a single band MMX, and add other bands later, purchase a dual band MMX, and add the third band later, or even get all three bands on your initial order!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpecifications are similar to the DMX-40+, such as receiver sensitivity of -119 dBm.  Power output is highest on 40 meter, and slightly lower on 80 and 20 meter bands, as listed in the \u003cstrong\u003eSpecifications tab\u003c\/strong\u003e in the right column.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eThe MMX-ZERO!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eA version of the MMX is available that is JUST for using with an existing station.  No QRP transceiver inside. It's called the \u003cstrong\u003eMMX-ZERO\u003c\/strong\u003e, or ZERO.  \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"MMX-ZERO\" href=\"https:\/\/www.preppcomm.com\/products\/mmx-zero-morse-intelligent-code-decoder-encoder\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eCheck it out\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e!\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBetter, Easier, Relaxing QSO's at Higher Speeds!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eDo you need help decoding those fast senders?\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eDo you want a less stressful QSO?\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eNot only do we help you decode with the best decoder in the industry, but you will gradually learn to do so as well by way of cognitive association!\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eFor sending, you can use a straight key, the built-in keyboard to Morse system with automatic station ID's and hand-offs, auto-CQ and station calls, automatic capture of the other station's call sign, plus the powerful RPL language for microprogramming to customize of the automation or create your own automations.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eAnd, you can get help and practice sending using the build-in decoder to listen to your keying in receive mode.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eIt will treat you as \"just another station\" and decode your signal, give you your speed, and tell you what other stations would think you had sent.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eGreat key training!\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eAnd don't forget to start by pressing the Space Bar to restart the decoder before you begin keying!.\u003c\/p\u003e\n\u003cp\u003eAnother stress reducer!\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe built-in typing speed test function sets your maximum transmit speed to match your typing speed!\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThis means that - even if the other guy can type or send at 35 WPM, but you can only type at 22 WPM, that is how fast you will go, enabling you to have time to partially fill the type-ahead buffer so you can relax and edit your keyboard mistakes, and have a little time to think about what you want to say next. A great stress reducer. Of course if the other station is sending at a lower speed, your MMX will match them so they can decode you!\u003c\/p\u003e\n\u003cp\u003eTalk about stress reducing, the automatic capture of the other station's call sign is a great one!  It automatically appears in the CCS button (CCS is Captured Call Sign), and is used for the automatic station ID's and hand-offs.  No more quick scribbling to write down their call sign!  Or typing station ID's over and over.  Even a Handle, QTH, Rig, Antenna macro built-in so you can send that info with a single keystroke!\u003c\/p\u003e\n\u003cp\u003eIf you want to use a paddle or iambic key, an external keyer is required to convert your key to straight key or \"pure Morse\" output to feed into the MMX.\u003c\/p\u003e\n\u003cp\u003eSo, up your game!\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eGet an MMX to go with you for a great experience in QRP with a lightweight powerful computer plus QRP transceiver!\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eGreat for POTA, SOTA, etc.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eOr, get an MMX attached to your station using our \u003ca title=\"Cable Assembly\" href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eExternal Transceiver Cable Assembly\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e to make it easy and neat to connect and integrate your station and the MMX as your decoder and encoder.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eYou can also just use the MMX as a decoder, with no keyboard by pressing the status line to restart the decoder\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eVideos And More Info!\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThere is lots more features:  check out our main features on the \u003cstrong\u003eFeatures tab\u003c\/strong\u003e in the right panel, and our \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca style=\"text-decoration: underline; color: #2b00ff;\" href=\"https:\/\/www.preppcomm.com\/pages\/more-features\" title=\"More Features\"\u003eMore Features\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e list!   \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eYou can \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"MMX Data Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/files\/MMX_Data_Sheet_sm.pdf?v=1646767843\" style=\"color: #2b00ff; text-decoration: underline;\" target=\"_blank\"\u003eD\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"MMX Data Sheet\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/files\/MMX_Data_Sheet_sm.pdf?v=1646767843\" style=\"color: #2b00ff; text-decoration: underline;\" target=\"_blank\"\u003eownload Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e here.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eBelow are two video links.  The first is a long open box to QSO live demo via Coffee and Ham Radio on YouTube.  Note that the MMX is accidentally placed into CTX mode during much of the session (and thus can't decode human code, or HCW).  I finally noticed that, and after that, things went a lot better!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff; text-decoration: underline;\"\u003eMMX Live Demo\u003c\/span\u003e\u003c\/span\u003e  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSince the MMX is just a DMX-40 with band cards, the DMX-40 videos are very helpful and on-target for learning about the MMX:\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/product-review-videos\" title=\"Demo Videos\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003eDMX-40 Videos\u003c\/span\u003e\u003c\/span\u003e\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAnd here is a look inside the MMX.  Note:  What comes with the MMX is misrepresented in this video.  Only the keyboard, cleaning cloth, and power adaptor come with the MMX, but otherwise, pretty accurate:\u003c\/p\u003e\n\u003cp\u003eAlso, for more information, read the \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/dmx-40-transceiver\" title=\"DMX-40 Transceiver\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eDMX-40 description\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e. The MMX has all the same functions and features, but 3 band capability!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/youtu.be\/FolGs-Wv9Cc\" title=\"What's inside the MMX\" target=\"_blank\"\u003eWhat's Inside the MMX\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eThe MMX Bundles\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003eTo make it easier to purchase the MMX, we offer 4 bundles:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"The MMX Bundle\" href=\"https:\/\/www.preppcomm.com\/products\/mmx-kit\"\u003eThe MMX Bundle\u003c\/a\u003e\u003c\/span\u003e\u003cb\u003e:\u003c\/b\u003e\u003c\/span\u003e this includes a stand, dummy load, cable adaptor, and cable assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"The MMX Complete Bundle\" href=\"https:\/\/www.preppcomm.com\/products\/mmx-complete-bundle\"\u003eThe MMX Complete Bundle\u003c\/a\u003e\u003c\/span\u003e: to \u003cspan\u003e#1 above,\u003c\/span\u003e we add a powered speaker, A\/C USB power block, 5V to 12V cable, audio cable, and USB cable for a truly complete setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"The MMX EMP Bundle\" href=\"https:\/\/www.preppcomm.com\/products\/mmx-emp-kit\"\u003eThe MMX EMP Bundle\u003c\/a\u003e\u003c\/span\u003e: To \u003cspan\u003e#1 above \u003c\/span\u003ewe add an EMP Shield zip-lock, a roll-up keyboard and cable, and an interior canvas bag for the MMX to protect the EMP Shield from sharp corners on the MMX\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"The MMX Complete EMP Bundle\" href=\"https:\/\/www.preppcomm.com\/products\/mmx-complete-emp-bundle\"\u003eThe MMX Complete EMP Bundle\u003c\/a\u003e\u003c\/span\u003e: To \u003cspan\u003e#2 above\u003c\/span\u003e we add an EMP Shield zip-lock, a roll-up keyboard and cable, and an interior canvas bag for the MMX to protect the EMP Shield from sharp corners on the MMX. We also add a second EMP Shield bag to protect the speaker, USB Power Block, and 5V-12V cable, all of which have sensitive electronics within them\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch4\u003e\u003cstrong\u003e______________________________________\u003c\/strong\u003e\u003c\/h4\u003e\n\u003ch4\u003e\n\u003cstrong\u003eInternational Orders\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003c\/span\u003e\n\u003c\/h4\u003e\n\u003cp\u003eBe aware that by purchasing a product from the USA will require going through customs in your country, and typically you may be required to pay duty on your order. Check with your local authorities for details. Also note that if your country uses the VAT tax system, VAT taxes will also apply. Finally, UPS also typically charges a fee for handling the collection of duties and taxes. USPS does not, but their shipments take longer.\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"PreppComm","offers":[{"title":"Triple Band - 80\/40\/20 Meters","offer_id":41870456783016,"sku":"PC-RTMMX842","price":329.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/products\/preppcomm-mmx-multi-band-morse-code-transceiver-32495786623144.jpg?v=1670874442"},{"product_id":"mmx-kit","title":"MMX Bundle","description":"\u003ch1\u003e\u003cstrong\u003eThe MMX Bundle\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eNew lower bundle price includes 20% off of accessories in the bundle \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bundle is a combination of the tri-band MMX plus commonly selected accessories, for the purpose of simplifying the purchase of an MMX-based radio. This includes:\u003c\/p\u003e\n\u003cp\u003e1. \u003ca title=\"MMX Tri-Band Morse Transceiver\" href=\"https:\/\/www.preppcomm.com\/products\/mmx-multiband-morse-code-transceiver?variant=41870456783016\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe tri-band MMX Morse Transceiver\u003c\/span\u003e\u003c\/a\u003e, providing QRP operation on 80, 40, and 20 meters, plus all bands and more power using your existing station transceiver.\u003cstrong\u003e Keyboard is included\u003c\/strong\u003e.\u003cbr\u003e2. \u003ca title=\"The Transceiver Cable Assembly\" href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe Transceiver Cable Assembly\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\" title=\"The Transceiver Cable Assembly\"\u003e,\u003c\/a\u003e enabling convenient interconnection to your existing transceiver for more power and more bands \u003cbr\u003e3. \u003ca title=\"The MMX Stand\" href=\"https:\/\/www.preppcomm.com\/products\/dmx-40-stand\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe MMX stand\u003c\/span\u003e\u003c\/a\u003e, to enable the screen to be visible at a 45 degree angle\u003cbr\u003e4. \u003ca title=\"The Cable Adaptor\" href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe cable adaptor\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" title=\"The Cable Adaptor\" target=\"_blank\"\u003e,\u003c\/a\u003e for use to connect to a RG-239 connector on an existing antenna. This is used for QRP operation, using the built-in transmitter and receiver.\u003c\/p\u003e\n\u003cp\u003eAnd now, we are adding an essential ingredient by popular demand!\u003c\/p\u003e\n\u003cp\u003e5. \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/5w-dummy-load\" title=\"5W Dummy Load\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eHF\/VHF\/UHF to 6 GHz 5W Dummy Load\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e, to keep your transmitter safe when not using a properly tuned antenna!\u003c\/p\u003e\n\u003cp\u003e6. A small set of wired earbuds.\u003c\/p\u003e\n\u003cp\u003eMore details can be viewed on each of the product pages using the links above.\u003c\/p\u003e","brand":"PreppComm","offers":[{"title":"Default Title","offer_id":43526803128488,"sku":"KIT-MMX1","price":368.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/files\/preppcomm-transceivers-mmx-bundle-kit-mmx1-36988542386344.png?v=1696706578"},{"product_id":"mmx-emp-kit","title":"MMX EMP Bundle","description":"\u003ch1\u003e\u003cstrong\u003eThe MMX EMP Bundle\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eNew lower bundle price includes 20% off of accessories in the bundle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis bundle is a combination of the 3-band MMX plus commonly selected accessories, for the purpose of simplifying the purchase of an MMX-based radio. This includes:\u003c\/p\u003e\n\u003cp\u003e1. \u003ca title=\"MMX Tri-Band Morse Transceiver\" href=\"https:\/\/www.preppcomm.com\/products\/mmx-multiband-morse-code-transceiver?variant=41870456783016\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe tri-band MMX Morse Transceiver\u003c\/span\u003e\u003c\/a\u003e, providing QRP operation on 80, 40, and 20 meters, plus all bands and more power using your existing station transceiver.\u003cstrong\u003e Keyboard is included\u003c\/strong\u003e.\u003cbr\u003e2. \u003ca title=\"The Transceiver Cable Assembly\" href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe Transceiver Cable Assembly\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\" title=\"The Transceiver Cable Assembly\"\u003e,\u003c\/a\u003e enabling convenient interconnection to your existing transceiver for more power and more bands \u003cbr\u003e3. \u003ca title=\"The MMX Stand\" href=\"https:\/\/www.preppcomm.com\/products\/dmx-40-stand\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe MMX stand\u003c\/span\u003e\u003c\/a\u003e, to enable the screen to be visible at a 45 degree angle\u003cbr\u003e4. \u003ca title=\"The Cable Adaptor\" href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe cable adaptor\u003c\/span\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" title=\"The Cable Adaptor\" target=\"_blank\"\u003e,\u003c\/a\u003e for use to connect to a RG-239 connector on an existing antenna. This is used for QRP operation, using the built-in transmitter and receiver.\u003cbr\u003e5. The \u003cspan style=\"text-decoration: underline;\"\u003e\u003cspan style=\"color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/transceiver-emp-kit\" title=\"Transceiver EMP Kit\" style=\"color: #2b00ff; text-decoration: underline;\"\u003eTransceiver EMP B\u003c\/a\u003eundle\u003c\/span\u003e\u003c\/span\u003e, adds protection to your MMX and provides a flexible keyboard to fit in the EMP shield bag. Also includes in inner canvas bag (not shown in photo above) photo) for enclosing the MMX to protect the EMP Shield from the corners of the MMX.\u003c\/p\u003e\n\u003cp\u003eAnd now, we are adding an essential ingredient by popular demand!\u003c\/p\u003e\n\u003cp\u003e5. \u003ca title=\"5W Dummy Load\" href=\"https:\/\/www.preppcomm.com\/products\/5w-dummy-load\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eHF\/VHF\/UHF to 6 GHz 5W Dummy Load\u003c\/span\u003e\u003c\/a\u003e, to keep your transmitter safe when not using a properly tuned antenna!\u003c\/p\u003e\n\u003cp\u003e6. A small set of wired earbuds for listening.\u003c\/p\u003e\n\u003cp\u003eMore details can be viewed on each of the product pages using the links above. Add our \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/no-tune-40-20-meter-end-fed-antenna-with-setup-kit\" title=\"NO TUNE 40\/20 Antenna\" style=\"color: #2b00ff; text-decoration: underline;\"\u003e40\/20 NO TUNE antenna\u003c\/a\u003e\u003c\/span\u003e - no EMP protection required!\u003c\/p\u003e","brand":"PreppComm","offers":[{"title":"Default Title","offer_id":43541062615208,"sku":"","price":408.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/files\/preppcomm-mmx-emp-bundle-36988547891368.png?v=1696706761"},{"product_id":"mmx-complete-bundle","title":"MMX Complete Bundle","description":"\u003ch1\u003e\u003cstrong\u003eThe MMX Complete Bundle\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eNew lower bundle price includes 20% off of accessories in the bundle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the complete bundle: everything you need to get started, just add an antenna. In fact, since this bundle includes a dummy load, you don't need an antenna to start practicing with this MMX, and believe it or not, people have made contacts using a dummy load!\u003c\/p\u003e\n\u003cp\u003eThis is a combination of the tri-band MMX plus a complete set of accessories, for the purpose of simplifying the purchase and use of an MMX-based radio. This includes:\u003c\/p\u003e\n\u003cp\u003e1. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/mmx-multiband-morse-code-transceiver?variant=41870456783016\" title=\"MMX Tri-Band Morse Transceiver\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe tri-band MMX Morse Transceiver\u003c\/span\u003e\u003c\/a\u003e, providing QRP operation on 80, 40, and 20 meters, plus all bands and more power using your existing station transceiver.\u003cstrong\u003e Keyboard is included\u003c\/strong\u003e.\u003cbr\u003e2. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\" title=\"The Transceiver Cable Assembly\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe Transceiver Cable Assembly\u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"The Transceiver Cable Assembly\" href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\"\u003e,\u003c\/a\u003e enabling convenient interconnection to your existing transceiver for more power and more bands \u003cbr\u003e3. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/dmx-40-stand\" title=\"The MMX Stand\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe MMX stand\u003c\/span\u003e\u003c\/a\u003e, to enable the screen to be visible at a 45 degree angle\u003cbr\u003e4. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" title=\"The Cable Adaptor\" target=\"_blank\"\u003e\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe cable adaptor\u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"The Cable Adaptor\" href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" target=\"_blank\"\u003e,\u003c\/a\u003e for use to connect to a RG-239 connector on an existing antenna. This is used for QRP operation, using the built-in transmitter and receiver.\u003cbr\u003e5. \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"5W Dummy Load\" href=\"https:\/\/www.preppcomm.com\/products\/5w-dummy-load\"\u003eHF\/VHF\/UHF to 6 GHz 5W Dummy Load\u003c\/a\u003e\u003c\/span\u003e, to keep your transmitter safe when not using a properly tuned antenna\u003cbr\u003e6. \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/mmxdmx-powered-speaker-with-cables\" title=\"MMX\/DMX Powered Speaker\" style=\"text-decoration: underline; color: #2b00ff;\"\u003eThe MMX Powered Speake\u003c\/a\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/mmxdmx-powered-speaker-with-cables\" title=\"MMX\/DMX Powered Speaker\" style=\"color: #2b00ff; text-decoration: underline;\"\u003er\u003c\/a\u003e\u003c\/span\u003e, which provides you with a great sound from your MMX for CW, AM shortwave, and of course SSB stations (Of course the MMX is CW transmit only). An audio cable to connect to the MMX, and a USB charging cable are included.\u003cbr\u003e7. \u003cstrong\u003eAC to USB wall plug\u003c\/strong\u003e with 2.1A and 1.0A outputs. Use 2.1A to run the MMX via the included 5V to 12V cable, and use the 1.0A output to charge the speaker.\u003cbr\u003e8. \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/5v-to-12v-cable\" title=\"5V to 12V Power Conversion Cable\" style=\"text-decoration: underline; color: #2b00ff;\"\u003e5V to 12V cable\u003c\/a\u003e\u003c\/span\u003e, connects the USB wall plug to the MMX with enough power to transmit at full QRP power.\u003cbr\u003e9. A small set of wired earbuds is included for privacy listening.\u003c\/p\u003e\n\u003cp\u003eMore details can be viewed on each of the product pages using the links above. You need an antenna, and for temporary setup or portable use, check out our\u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"40\/20 NO TUNE Antenna\" href=\"https:\/\/www.preppcomm.com\/products\/no-tune-40-20-meter-end-fed-antenna-with-setup-kit\"\u003e 40\/20 NO TUNE Antenna\u003c\/a\u003e\u003c\/span\u003e. Also, if you are going portable, you need a 5V supply, such as our \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"Super Power Solar Battery\" href=\"https:\/\/www.preppcomm.com\/products\/dmx-mmx-super-power-solar-battery-system\"\u003eSolar Battery System\u003c\/a\u003e\u003c\/span\u003e. And finally, you can stash it all in the \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"Deluxe Canvas EMP Bag\" href=\"https:\/\/www.preppcomm.com\/products\/canvas-emp-bag\"\u003eDeluxe Canvas EMP Bag\u003c\/a\u003e\u003c\/span\u003e!\u003c\/p\u003e","brand":"PreppComm","offers":[{"title":"Default Title","offer_id":45218248196264,"sku":null,"price":412.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/files\/preppcomm-transceivers-mmx-complete-bundle-36989082108072.png?v=1696722776"},{"product_id":"mmx-complete-emp-bundle","title":"MMX Complete EMP Bundle","description":"\u003ch1\u003e\u003cstrong\u003eThe MMX Complete EMP Bundle\u003c\/strong\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eNew lower bundle price includes 20% off of accessories in the bundle\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the complete EMP bundle: everything you need to get started, just add an antenna. In fact, since this bundle includes a dummy load, you don't need an antenna to start practicing with this MMX, and believe it or not, people have made contacts using a dummy load! And, of course, we add in the EMP shield bag, folding keyboard, and internal canvas bag for the MMX for storage in case of an EMP event. A second EMP shield bag is included to protect the speaker, 5V to 12V cable, and USB power block.\u003c\/p\u003e\n\u003cp\u003eThis is a combination of the tri-band MMX plus a complete set of accessories, for the purpose of simplifying the purchase, protection, and use of an MMX-based radio. This includes:\u003c\/p\u003e\n\u003cp\u003e1. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/mmx-multiband-morse-code-transceiver?variant=41870456783016\" title=\"MMX Tri-Band Morse Transceiver\" target=\"_blank\"\u003e\u003cspan\u003eThe tri-band MMX Morse Transceiver\u003c\/span\u003e\u003c\/a\u003e, providing QRP operation on 80, 40, and 20 meters, plus all bands and more power using your existing station transceiver.\u003cstrong\u003e Keyboard is included\u003c\/strong\u003e.\u003cbr\u003e2. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\" title=\"The Transceiver Cable Assembly\" target=\"_blank\"\u003e\u003cspan\u003eThe Transceiver Cable Assembly\u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"The Transceiver Cable Assembly\" href=\"https:\/\/www.preppcomm.com\/products\/external-transceiver-cable-assembly\"\u003e,\u003c\/a\u003e enabling convenient interconnection to your existing transceiver for more power and more bands \u003cbr\u003e3. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/dmx-40-stand\" title=\"The MMX Stand\" target=\"_blank\"\u003e\u003cspan\u003eThe MMX stand\u003c\/span\u003e\u003c\/a\u003e, to enable the screen to be visible at a 45 degree angle\u003cbr\u003e4. \u003ca href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" title=\"The Cable Adaptor\" target=\"_blank\"\u003e\u003cspan\u003eThe cable adaptor\u003c\/span\u003e\u003c\/a\u003e\u003ca title=\"The Cable Adaptor\" href=\"https:\/\/www.preppcomm.com\/products\/adaptor-cable-sma-male-to-so-239-mmx-to-pl-239\" target=\"_blank\"\u003e,\u003c\/a\u003e for use to connect to a RG-239 connector on an existing antenna. This is used for QRP operation, using the built-in transmitter and receiver.\u003cbr\u003e5. \u003cspan style=\"color: #2b00ff;\"\u003e\u003ca title=\"5W Dummy Load\" href=\"https:\/\/www.preppcomm.com\/products\/5w-dummy-load\" style=\"color: #2b00ff;\"\u003eHF\/VHF\/UHF to 6 GHz 5W Dummy Load\u003c\/a\u003e\u003c\/span\u003e, to keep your transmitter safe when not using a properly tuned antenna\u003cbr\u003e6. \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/mmxdmx-powered-speaker-with-cables\" title=\"MMX\/DMX Powered Speaker\" style=\"color: #2b00ff;\"\u003eThe MMX Powered Speake\u003c\/a\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/mmxdmx-powered-speaker-with-cables\" title=\"MMX\/DMX Powered Speaker\" style=\"color: #2b00ff;\"\u003er\u003c\/a\u003e\u003c\/span\u003e, which provides you with a great sound from your MMX for CW, AM shortwave, and of course SSB stations (Of course the MMX is CW transmit only). An audio cable to connect to the MMX, and a USB charging cable are included.\u003cbr\u003e7. \u003cstrong\u003eAC to USB wall plug\u003c\/strong\u003e with 2.1A and 1.0A outputs. Use 2.1A to run the MMX via the included 5V to 12V cable, and use the 1.0A output to charge the speaker.\u003cbr\u003e8. \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca href=\"https:\/\/www.preppcomm.com\/products\/5v-to-12v-cable\" title=\"5V to 12V Power Conversion Cable\" style=\"color: #2b00ff; text-decoration: underline;\"\u003e5V to 12V cable\u003c\/a\u003e,\u003c\/span\u003e connects the USB wall plug to the MMX with enough power to transmit at full QRP power.\u003cbr\u003e9. \u003cspan style=\"text-decoration: underline; color: #2b00ff;\"\u003e\u003ca style=\"color: #2b00ff; text-decoration: underline;\" title=\"Transceiver EMP Bundle\" href=\"https:\/\/www.preppcomm.com\/products\/transceiver-emp-kit\"\u003eTransceiver EMP Bundle\u003c\/a\u003e\u003c\/span\u003e, which is used to protect the DMX, and includes an EMP Shield bag with closer, a roll-up keyboard and interior canvas bag for the DMX (protects the inside of the EMP Shield bag).\u003cbr\u003e10. \u003cstrong\u003eAn extra EMP Shield bag\u003c\/strong\u003e for the speaker, USB power block, and the 5V to 12V cable, all of which have electronics inside to be protected from EMP.\u003cbr\u003e11. A small set of wired earbuds for listening in private.\u003c\/p\u003e\n\u003cp\u003eMore details can be viewed on each of the product pages using the links above. You need an antenna, and for temporary setup or portable use, check out our\u003cspan\u003e\u003ca title=\"40\/20 NO TUNE Antenna\" href=\"https:\/\/www.preppcomm.com\/products\/no-tune-40-20-meter-end-fed-antenna-with-setup-kit\"\u003e 40\/20 NO TUNE Antenna\u003c\/a\u003e\u003c\/span\u003e. Also, if you are going portable, you need a 5V supply, such as our \u003cspan\u003e\u003ca title=\"Super Power Solar Battery\" href=\"https:\/\/www.preppcomm.com\/products\/dmx-mmx-super-power-solar-battery-system\"\u003eSolar Battery System\u003c\/a\u003e\u003c\/span\u003e. And finally, you can stash it all in the \u003cspan\u003e\u003ca title=\"Deluxe Canvas EMP Bag\" href=\"https:\/\/www.preppcomm.com\/products\/canvas-emp-bag\"\u003eDeluxe Canvas EMP Bag\u003c\/a\u003e\u003c\/span\u003e!\u003c\/p\u003e","brand":"PreppComm","offers":[{"title":"Default Title","offer_id":45218739880104,"sku":null,"price":452.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/files\/preppcomm-mmx-complete-emp-bundle-36989052485800.png?v=1696721517"},{"product_id":"preppcomm-mini-go-bag","title":"PreppComm Mini Go Bag Bundles","description":"\u003ch1\u003ePreppComm Mini GO Bag Bundles\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eBundle price includes 20% off of accessories in the bundle!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll variants of the Mini GO Bag are based on the \u003ca href=\"https:\/\/www.preppcomm.com\/products\/mini-go-bat\" title=\"Mini GO Bag\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003ePreppComm Mini GO Bag\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e custom shoulder and messenger bag. This bag is small and lightweight, but packs 6 separate storage areas, and expands to hold a complete ham station!\u003c\/p\u003e\n\u003ch2\u003eHF Mini GO Bag\u003c\/h2\u003e\n\u003cp\u003eThis variant of the bag adds in the \u003ca data-mce-fragment=\"1\" title=\"NO TUNE 40\/20 antenna\" href=\"https:\/\/u5kgqrzulb2yaltu-50754977960.shopifypreview.com\/products\/no-tune-40-20-meter-end-fed-antenna-with-setup-kit\"\u003e\u003cspan data-mce-fragment=\"1\" style=\"text-decoration: underline;\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNO TUNE 40\/20 Antenna and Setup KIt\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e, as well as an \u003ca title=\"DMX\/MMX Stand\" href=\"https:\/\/www.preppcomm.com\/products\/dmx-40-stand\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eS2X-2 Stand\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e. Antenna components are stored in an external canvas bag.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo other variants include the HF Mini GO Bag bundled with an MMX or DMX transceiver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes\u003c\/strong\u003e none of the GO Bag bundles  includes a powered speaker. Rather, a small set of wired earbuds is included to save space. Also, the entire antenna setup kit is not shown, but all the components are included and shipped inside the PreppComm Mini Go Bag. For more details on what is included in the antenna setup kit, please refer to the \u003ca title=\"NO TUNE 40\/20 antenna\" href=\"https:\/\/u5kgqrzulb2yaltu-50754977960.shopifypreview.com\/products\/no-tune-40-20-meter-end-fed-antenna-with-setup-kit\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eNO TUNE 40\/20 Antenna\u003c\/strong\u003e\u003c\/span\u003e\u003c\/a\u003e details.\u003c\/p\u003e","brand":"PreppComm","offers":[{"title":"Basic Mini w\/DMX-40","offer_id":47589568512168,"sku":"","price":340.0,"currency_code":"USD","in_stock":true},{"title":"Basic Mini w\/MMX 3-band","offer_id":47589568544936,"sku":"","price":440.0,"currency_code":"USD","in_stock":true},{"title":"HF Mini GO Bag","offer_id":47589568577704,"sku":"","price":360.0,"currency_code":"USD","in_stock":true},{"title":"HF Mini w\/DMX-40","offer_id":47589568610472,"sku":"","price":589.0,"currency_code":"USD","in_stock":true},{"title":"HF Mini w\/MMX 3-band","offer_id":47589568643240,"sku":"","price":689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/files\/preppcomm-go-bag-basic-mini-w-dmx-40-preppcomm-mini-go-bag-38294627909800.png?v=1712771210"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0507\/5497\/7960\/collections\/american-flag-backgrounds-free-photo_70e61e2c-4e04-4d6b-b3ad-542a0b335deb.jpg?v=1770928395","url":"https:\/\/morsenexus.com\/collections\/mmx-collection.oembed","provider":"PreppComm","version":"1.0","type":"link"}